AGILENT TECHNOLOGIES (HP) 7673A/1/11
|
|
|
The HP
7673A represents one of the world’s most popular autosamplers
and there are many vials, caps and seals from the Chromacol
range, which are ideal for this instrument. Our 2-CV and 2-SVW
vials have been designed to work with the robotic transport
system of this unit, and our MICRO+™ range of vials for microsampling
allow very small sample volumes to be used. Our type 7 rubber/PTFE
seals are recommended for this autosampler.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP CAPS |
| 1 |
2-CV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™ grade glass. |
| |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| 4 |
09-CTVº |
900µL,
clear glass, tapered vial, needs WS-6 polythene support. |
| |
03-FIV |
300µL,
one piece, clear glass insert and vial combination. With 'write
on' patch. Micro+™ |
| 2 |
03-FIV(A) |
300µL,
one piece, glass insert and amber vial combination. With 'write
on' patch. Micro+™ |
| |
RECOMMENDED
11mm CRIMP (Silver) CAPS |
| |
11-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. Other colours available. |
| |
11-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 30. Good for ECD. |
| 1 |
11-AC-ST15 |
.Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57 |
|
| Table
2 |
MICRO-VIALS
USING 8mm CRIMP CAPS |
| |
08-CRV(A)º |
800µL,
amber glass, crimp top, round bottom vial. Needs WS-5 support. |
| |
06-CTV(A)º |
600µL,
amber glass, crimp top, tapered vial. Needs WS-5 support. |
| |
03-CVG¸¸ |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™ grade glass. Needs SV-S11G or SV-S11A
support. |
| 5 |
02-CTVG¸¸ |
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Needs SV-S11G or SV-S11A
support. |
| |
01-CVG¸¸ |
100µL,
clear glass, crimp top, round bottom vial, with built in needle
guide, made from inert, CHROMACOL GOLD™ grade
glass. Needs SV-S11G or SV-S11A support. |
| |
RECOMMENDED
8mm CRIMP (Silver) CAPS |
| |
8-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. |
| |
8-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 30. Good for ECD. |
| |
8-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
|
| Table
3 |
LOW
VOLUME INSERTS FOR USE WITH 2-CV, 2-CVG, 2-CV(A), 2-DV, 2-DV(A) |
| |
02-MTVWG |
200µL,
clear glass, tapered low volume insert for use with 12 x 32mm
flat bottom, wide neck vial. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support. |
| |
03-NV |
300µL,
clear glass, low volume, flat bottom insert. For use with wide
necked vials. No support needed. |
|
| Table
4 |
VIALS
USING 8mm SCREW CAPS |
| |
2-SV
|
2mL,
clear glass, flat bottom, screw top vial. With 'write-on' patch. |
| |
2-SV(A)
|
2mL,
amber glass, flat bottom, screw top vial. With 'write-on'patch.
|
| |
2-SVG
|
2mL,
clear glass, flat bottom, screw top vial. Made from inert, CHROMACOL
GOLD™ grade glass. These vials must use the
8-SC(B)
screw caps using 8-6RTI, 8-ST15
or 8-ST101 seals |
|
RECOMMENDED
8MM SEALS |
| |
8-6RTI |
8mm,
natural rubber/PTFE seal with a Shore hardness value 38. |
| |
8-ST15 |
8mm,
white silicone/red PTFE seal. Shore hardness value 57. |
| |
8-ST101 |
8mm,
blue silicone/PTFE seal. Shore hardness value 30. |
|
| Table
5 |
LOW
VOLUME INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV |
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200µL,
clear glass, low volume, flat bottom insert. No support needed. |
|
| Note |
4-SV |
Wash
vial. 4mL, 15 x 46mm, clear glass, screw top, flat bottom vial.
|
|
|
|
|