|
CTC/LEAP A200S WITH 105 VIAL TRAY
|
|
|
As a result
of extensive testing, the recommended seal for these units
is our ST-144 formulation. This is a powder blue silicone
elastomer with a red PTFE coating. Some of the more recent
CTC instruments are compatible with our WebSeal™ 96 well titer
plate products.
|
|
|
| Table
1 |
VIALS
USING
11mm CRIMP CAPS |
| 3 |
2-CV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™ grade glass. |
| |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
1.1-CTVG |
1.1mL,
clear glass, crimp top, tapered, wide neck vial. Made from inert
CHROMACOL GOLD™ grade glass. Needs TTS-313 PTFE
support, |
| |
06-PECV |
.600µL,
polyethylene vial with an internal tapered profile. |
| |
06-PPCV |
600µL,
polypropylene vial with an internal tapered profile. |
| |
03-FIV |
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| 1 |
03-FIV(A) |
300µL,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
|
|
| |
RECOMMENDED
11mm
CRIMP (Silver) CAPS |
| |
11-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
11-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 30. Good
for ECD |
| |
11-AC(B)-ST144 |
Aluminium
crimp cap, blue, fitted with a blue silicon/red PTFE seal. |
|
| Table
2 |
VIALS
USING 8mm SCREW CAPS |
| |
2-SV |
2mL,
clear glass, flat bottom, screw top vial. With 'write on patch'. |
| 2 |
2-SV(A) |
2mL,
amber glass, flat bottom, screw top vial. With 'write on patch'. |
| |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made
from inert CHROMACOL GOLD™ grade glass. |
| |
1.1-STVG |
1.1mL,
clear glass, screw top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Needs a TTS-312 support. |
| |
06-PESV |
600µL,
polyethylene, screw top vial with an internal tapered profile. |
| |
06-PPSV |
600µL,
polypropylene, screw top vial with an internal tapered profile. |
| |
RECOMMENDED
CAPS
AND SEALS |
| |
8-SC |
Black
screw top, no seal. Also available in red, white, yellow and
blue. |
| |
8-SC-ST15 |
Black,
screw cap pre-fitted with a silicone/red PTFE seal. Shore hardness
value 57. |
| |
8-ST15 |
1.5mm
thick, white silicone/red PTFE seal. Shore hardness value 57. |
| |
8-ST143 |
1.4mm
thick, white silicone/ PTFE seal. Shore hardness value 20. |
| |
8-ST101 |
1mm
thick, blue silicone/clear PTFE seal. Shore hardness value 30.
Good for ECD |
|
| Table
3 |
LOW
VOLUME INSERTS FOR USE WITH 2-CV, 2-CVG, 2-CV(A) |
| |
02-MTVWG |
200µL,
clear glass, tapered low volume insert for use with 12 x 32mm
flat bottom, wide neck vial. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support. |
| |
03-NV |
300µL,
clear glass, low volume, flat bottom insert. For use with wide
necked vials. No support needed. |
|
| Table
4 |
MICRO-VIALS
USING 8mm CRIMP CAPS |
| |
08-CRV(A)
|
800µL,
amber glass, crimp top, round bottom. Uses the WS-5 support
sleeve. |
| |
06-CTV(A)
|
600µL,
amber glass, crimp top, tapered vial. Uses the WS-5 support
sleeve. |
| |
03-CVG |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™ grade glass. Uses the SV-TSP support sleeve. |
| 4
|
02-CTVG
|
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Uses the SV-TSP support sleeve. |
| 3 |
01-CVG
|
100µL,
clear glass, crimp top, round bottom vial, with built in needle
guide, made from inert CHROMACOL GOLD™ grade glass. Uses
the SV-TSP support sleeve. |
| |
RECOMMENDED 8mm CRIMP (Silver) CAPS |
| |
8-AC-ST15 |
Aluminium
crimp cap
fitted with a white silicone/red PTFE seal. Shore hardness value
57. |
| |
8-AC-ST101 |
Aluminium
crimp cap
fitted with a blue silicone/ PTFE seal. Shore hardness value
30. Good for ECD |
| |
8-AC(B)-ST144 |
Aluminium
crimp cap,
blue, fitted with a blue silicone/red PTFE seal. |
|
| Table
5 |
LOW
VOLUME INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV |
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200µL,
clear glass, low volume, flat bottom insert. No support needed. |
|
|
|
|