MERCK/HITACHI
|
|
|
These autosamplers use a variety of racks so that they are
compatible with a wide variety of vials.They do however require
the use of a pre-cut seal which means that our 11-AC-ST101X
and 8-ST14X products are ideal.
|
|
|
| Table
1 |
VIALS
USING 12mm SCREW CAPS |
| 7 |
4-SV |
4mL,
clear glass, screw top, flat bottom vial. |
| |
4-SV(A) |
4mL,
amber glass, screw top, flat bottom vial. |
| |
RECOMMENDED
CAPS AND SEALS |
| |
12-SC |
12mm,
black screw cap, no seal. Also available in red, white, yellow
and green with the following codes: 12-SC(R), 12-SC(W), 12-SC(Y)
AND 12-SC(WG). |
| |
12-SC-8RT1
|
12mm,
black, screw cap pre-fitted with a type 8, rubber/PTFE seal.
Shore hardness value 38. |
| |
12-SC-ST2 |
12mm,
black, screw cap pre-fitted with a silicone/PTFE seal. |
| |
12-6RT1 |
1mm
thick, natural rubber/PTFE seal. Shore hardness value 38. |
| |
12-ST2 |
2mm
thick, white silicone/red PTFE seal. |
| |
12-ST18 |
1.8mm
thick, blue silicone/clear PTFE seal. |
| |
12-ST143 |
1.4mm
thick, white silicone/ PTFE seal. Shore hardness value 20. |
| |
12-ST101 |
1mm
thick, blue silicone/clear PTFE seal. Shore hardness value 30. |
| |
12-T02 |
0.25mm
thick, white PTFE seal. Does not re-seal. |
|
| Table
2 |
VIALS
USING 11mm CRIMP CAPS AND PLASTIC CAPS |
| |
4-CV
|
4mL,
clear glass, crimp top, flat bottom vial. |
| 1 |
2-CV
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
2-CVG |
2mL,
clear glass, wide neck, crimp top, flat bottom vial made from
inert CHROMACOL GOLD™ grade glass. |
| |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| 5 |
1.1-CTVG¸º |
1.1mL,
clear glass, crimp top, tapered vial made from inert CHROMACOL
GOLD™ grade glass. Needs a PTFE support sleeve,
part number TTS-312. |
| |
2-DV¸ |
2mL,
clear glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. Double Top™ vial. |
| |
2-DV(A)¸ |
2mL,
amber glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. Double Top™ vial.
|
| |
03-FIV
|
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| 3 |
03-FIV(A)
|
300µL,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
RECOMMENDED
11mm CRIMP (Silver) AND SCREW CAPS |
| |
11-AC-ST101X |
Aluminium
crimp cap fitted with a pre-cut blue silicone/PTFE seal. |
| |
11-PEC1X |
Polyethylene
Snap Cap™, pre-cut. |
| |
11-DSC(R)-ST14X
|
Screw
cap, red, multistart, for use with DOUBLE TOP™
vials, 2-DV and2-DV(A), prefitted with a blue silicone/PTFE
pre-cut seal. Shore hardness value 50. |
|
| Table
3 |
MICRO-VIALS
USING 8mm CRIMP CAPS AND PLASTIC CAPS |
| |
08-CRV(A)º |
800µL,
amber glass, crimp top, round bottom vial. Uses the WS-5 support
sleeve. |
| |
08-CV
|
800µL,
clear glass, crimp top, flat bottom vial. For the AS-4000. |
| |
06-CTV(A)º |
600µL,
amber glass, crimp top, tapered vial, needs WS-5 support sleeve. |
| |
05-CTV(A)º |
500µL,
amber glass, crimp top, tapered vial, uses WS-1 support sleeve.
For the AS-4000. |
| |
03-CVG¸¸ |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™ grade glass. Needs support sleeve SV-S1.
|
| 8 |
02-CTVG¸¸ |
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Needs support sleeve SV-S1. |
| 4 |
01-CVG¸¸ |
100µL,
clear glass, crimp top, round bottom vial made from inert
CHROMACOL GOLD™ grade glass, with built in
needle guide. Needs support sleeve SV-S1.
The 03-CVG,
02-CTVG and 01-CVG in some trays may be used without a support.
If replacing a 2mL vial (2-SV) and a wider flange cap (8-SCJ)
then an SV-S12A must be used.
|
| |
RECOMMENDED
8mm CRIMP (Silver) CAPS |
| |
8-AC-ST101X
|
Aluminium
crimp cap fitted with a pre-cut blue silicone/PTFE seal. |
| |
8-PEC1X
|
Polyethylene
Snap Cap™, pre-cut. |
|
|
|
|