PERKIN ELMER ISS-100, ISS-200, INTEGRAL 4000 AND
SERIES 200
|
|
|
These autosamplers for LC use a rack system which means that
there are many vials compatible with them. For microsampling
our MICRO+™ and our SCI-VI™ are recommended. Our 10-CV and
6-CV vials are used for wash /waste. Our WebSeal™ 96 well
titer plates products are suitable for certain versions of
these instruments.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP CAPS |
| 1a |
2-CV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™ grade glass. |
| 3 |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
2-CRV |
2mL,
clear glass, crimp top vial, with a round bottom suitable for
derivatisation and concentration by evaporation. |
| |
06-PECV |
600µL
polyethylene,
crimp top vial with an internal tapered profile. |
| |
06-PPCV |
600µL,
polypropylene crimp top vial with an internal tapered profile. |
| |
03-FIV |
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| 3a |
03-FIV(A) |
300µL,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
2-DV |
2mL,
clear glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. DOUBLE TOP™ vial. |
| |
2-DV(A) |
2mL,
amber glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. DOUBLE TOP™ vial. |
| |
CRIMP CAPS (Silver) AND PLASTIC PLUGS |
| |
11-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. Other colours available. |
| |
11-AC-ST15 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 57. |
| |
11-AC-ST101X |
Aluminium
crimp cap fitted with a pre-cut blue silicone/PTFE seal, with
anti vacuum device. |
| |
11-AC-PP |
Aluminium
crimp cap fitted with a thin polypropylene seal. |
| |
11-ACT
|
Aluminium
crimp cap fitted with a plain PTFE seal. Does not re-seal. |
| |
11-PEC1X
|
Polyethylene
SNAP CAP™, with anti-vacuum device, pre-cut. |
| |
11-PEPC3XW
|
Polyethylene
SNAP CAP™, with anti-vacuum device, pre-cut.
|
| |
SCREW
CAPS FOR DOUBLE TOP™
VIALS |
| |
11-DSC(R)-ST14X
|
Screw
cap, red, multistart, for use with DOUBLE TOP™
vials, 2-DV and 2-DV(A), prefitted with a blue silicone/PTFE
pre-cut seal. Shore hardness value 50. |
|
| Table
2 |
VIALS
USING 8mm SCREW CAPS |
| 1 |
2-SV |
2mL,
clear glass, flat bottom, screw top vial. With 'write-on' patch.
|
| 2a |
2-SV(A) |
2mL,
amber glass, flat bottom, screw top vial. With 'write-on' patch.
|
| |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made from inert CHROMACOL
GOLD™ grade glass. |
| 2 |
06-PESV |
600µL,
polyethylene, screw top vial with an internal tapered profile.
|
| |
06-PPSV |
600µL,
polypropylene, screw top vial with an internal tapered profile.
These vials accept all 8-SC
caps, other colours available. Should be used with our
8-ST14X seal. |
|
| Table
3 |
MICRO-VIALS
USING 8mm CRIMP CAPS |
| |
03-CVG |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™ grade glass. Needs SV-S11A PTFE sleeve, |
| |
02-CTVG |
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Needs SV-S11A PTFE sleeve, |
| 4 |
01-CVG
|
100µL,
clear glass, crimp top, round bottom vial made from inert CHROMACOL
GOLD™ grade glass, with built in needle guide.
Needs SV-S11A PTFE sleeve, |
| |
RECOMMENDED 8mm CRIMP (Silver) CAPS FOR MICRO-VIALS |
| |
8-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. |
| |
8-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
8-ACT |
Aluminium
crimp cap fitted with a plain PTFE disc seal. Does not re-seal. |
| |
8-AC-ST101X
|
Aluminium
crimp cap fitted with a pre-cut blue silicone/PTFE seal. |
| |
8-PEC1X
|
Polyethylene
SNAP CAP™, with anti-vacuum device. |
|
| Table
4 |
LOW
VOLUME
INSERTS
FOR USE WITH 2-CV, 2-CVG, 2-CV(A), 2-DV, 2-DV(A) |
| |
02-MTVWG
|
200µL,
clear glass, tapered low volume insert for use with 12 x 32mm
flat bottom, wide neck vials. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support. |
| |
03-NV
|
300µL,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck, flat bottom vials. |
|
| Table
5 |
LOW
VOLUME INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV |
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200µL,
clear glass, low volume, flat bottom insert. No support needed. |
|
| Table
6 |
LARGE VOLUME
VIALS
Certain
large volume vials are used for waste and sample processing
|
| |
10-CV
|
10mL,
crimp top, headspace vial, used in integral 4000. |
| 4a |
6-CV
|
6mL,
crimp top, headspace vial, used in the ISS100/200 and the Series
200. |
| |
RECOMMENDED
CAPS |
| |
20-PEPC5 |
20mm,
polyethylene SNAP CAP™ |
| |
20-AC-ST15 |
Aluminium
crimp cap fitted with a blue silicone/red PTFE seal. Shore hardness
value 52. |
| |
20-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/ PTFE seal. Shore hardness
value 45. |
|
|
|
|