SHIMADZU GC AUTOSAMPLERS
|
|
|
Our blue silicone/PTFE formulation, ST-101, has the required
degree of hardness for this autosampler and being an extremely
clean formulation is suited for use with selective detectors
and Mass Spectrometry. For less demanding operations, and
where less aggressive solvents are to be used, our type 6
rubber/PTFE formulation is ideal.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP CAPS |
| |
2-CV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™ grade glass. |
| |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
06-PECV |
600無,
polyethylene vial with an internal tapered profile. |
| |
06-PPCV |
600無,
polypropylene vial with an internal tapered profile. |
| 1 |
03-FIV |
300無,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| |
03-FIV(A) |
300無,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
RECOMMENDED
11mm CRIMP (Silver) CAPS |
| |
11-AC5 |
Aluminium
crimp cap fitted with a type 5, rubber/PTFE seal. Shore hardness
value 38. Other colours available. |
| |
11-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 30. Good for ECD |
|
| Table
2 |
MICRO-VIALS
USING 8mm CRIMP CAPS |
| |
06-CTV(A) |
600無,
amber glass, crimp top, flat bottom vial. Needs WS-5 support
sleeve. |
| 5 |
03-CVG |
300無,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™ grade glass. Needs support reference SV-S11A. |
| |
|
|
|
02-CTVG |
200無,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™ grade glass. Needs support reference SV-S11A. |
| |
01-CVG |
100無,
clear glass, crimp top, round bottom vial, with built in needle
guide, made from inert, CHROMACOL GOLD™ grade
glass. Needs support reference SV-S11A. |
| |
RECOMMENDED
8mm CRIMP (Silver) CAPS FOR MICRO-VIALS |
| |
8-AC5 |
Aluminium
crimp cap fitted with a type 5, rubber/PTFE seal. Shore hardness
value 38. |
| |
8-AC-ST101 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 30.Good for ECD |
|
| Table
3 |
LOW
VOLUME INSERTS FOR USE WITH 2-CV, 2-CVG, 2-CV(A), 2-DV, 2-DV(A) |
| |
02-MTVWG |
200無,
clear glass, tapered low volume insert for use with 12 x 32mm
flat bottom, wide neck vial. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support. |
| |
03-NV |
300無,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck, flat bottom vials. |
|
| Table
4 |
VIALS
USING 8mm SCREW CAPS |
| |
2-SV
|
2mL,
clear glass, flat bottom, screw top vial. With 'write-on' patch. |
| 2 |
2-SV(A)
|
2mL,
amber glass, flat bottom, screw top vial. With 'write-on'patch.
|
| 4 |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made from inert, CHROMACOL
GOLD™ grade glass. |
|
1.1-STVG |
1.1mL,
clear glass, screw top, tapered vial made from inert CHROMACOL
GOLD™ grade glass. Needs a TTS-312 PTFE support sleeve.
|
| |
06-PESV |
600無,
polyethylene, screw top vial with an internal tapered profile.
|
| |
06-PPSV |
600無,
polypropylene, screw top vial with an internal tapered profile.
These
vials must use the 8-SC(B) screw
caps using 8-6RT1, 8-ST15 or
8-ST101 seals, with 1050/1100 instruments.
|
| |
RECOMMENDED
8mm SEALS
|
| |
8-ST143 |
8mm,
white silicone/PTFE seal. Shore hardness value 20. |
| |
8-ST101 |
8mm,
blue silicone/PTFE seal. Shore hardness value 30. |
|
| Table
5 |
LOW
VOLUME INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV |
200無,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200無,
clear glass, low volume, flat bottom insert. No support needed. |
|
|
|
|