THERMOQUEST/CE/FISONS AS 800
|
|
|
The earlier versions
of these autosamplers used our 2.5-CV 40mm crimp top vial.
To allow the use of the standard 12 x 32mm 2mL vials, we developed
a blue plastic support, PWS-11, to fit into the carousel cavities.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP CAPS |
| |
2.5-CV
|
2.5mL,
clear glass, crimp top, flat bottom vial. |
| 2 |
2-CV
|
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG |
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™
grade glass. |
| 6
|
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
2-CRV
|
2mL,
clear glass, crimp top, round bottom, wide neck vial. |
| |
2-DV |
2mL,
clear glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. Double Toptm vial. |
| |
2-DV(A) |
2mL,
amber glass, flat bottom, wide neck vial, which may be used
with crimp or screw caps. Double Toptm vial. |
| |
1.1-CTVG |
1.1mL,
clear glass, crimp top, tapered, wide neck vial. Made from inert
CHROMACOL GOLD™
grade glass. Needs TTS-312 and PWS-11 supports. |
| |
06-PECV |
600µL,
polyethylene vial with an internal tapered profile. |
| |
06-PPCV |
600µL,
polypropylene vial with an internal tapered profile. |
| 1
|
03-FIV |
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™.
|
| |
03-FIV(A) |
300µL,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™.
|
| |
RECOMMENDED
11mm CRIMP (Silver) CAPS |
| |
11-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. Other colours available. |
| |
11-AC(B)-ST144 |
Aluminium
crimp cap, blue, fitted with a blue silicone/red PTFE seal. |
|
| Table
2 |
VIALS
USING 8mm SCREW CAPS |
| |
2-SV |
2mL,
clear glass, flat bottom, screw top vial. With 'write-on' patch. |
| |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made from inert CHROMACOL
GOLD™
grade glass. |
| 3 |
2-SV(A) |
2mL,
amber glass, flat bottom, screw top vial. With 'write-on' patch. |
| |
1.1-STVG |
1.1mL,
clear glass, screw top, tapered vial made from inert CHROMACOL
GOLD™
grade glass. Needs TTS-312 and PWS-11 supports. |
| |
06-PESV |
600µL,
polyethylene, screw top vial with an internal tapered profile.
|
| |
06-PPSV |
600µL,
polypropylene, screw top vial with an internal tapered profile. |
| |
RECOMMENDED
8mm SCREW CAPS |
| |
8-SC |
Black
screw cap, no seal. Also available in red, white, yellow and
blue with the following codes: 8-SC(R), 8-SC(W), 8-SC(Y) and
8-SC(BT). |
| |
8-ST144
|
1.4mm
thick, blue silicone/ PTFE seal. |
|
| Table
3 |
LOW
VOLUME INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV
|
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200µL,
clear glass, low volume, flat bottom insert. No support needed.
|
| |
LOW
VOLUME
INSERTS
FOR USE WITH2-CV, 2-CVG, 2-CV(A), 2-DV, 2-DV(A) |
| |
02-MTVWG |
200µL,
clear glass, tapered low volume insert for use with 2mL flat
bottom, wide neck vials. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support.
|
| |
03-NV
|
300µL,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck vials. |
|
| Table
4 |
MICRO-VIALS
USING
8mm CRIMP CAPS |
| |
1.2-CWV
|
1.2mL,
clear glass, crimp top, flat bottom vial.
|
| |
1-CWV
|
1mL,
clear glass, crimp top, tapered vial. |
| 4 |
08-CRV(A) |
800µL,
amber glass, crimp top, round bottom vial. Uses the WS-5 support
sleeve. |
| |
06-CTV(A) |
600µL,
amber glass, crimp top, tapered vial, needs WS-5 support sleeve.
|
| 5 |
03-CVG |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™
grade glass. Uses the SV-S1 support sleeve. |
| |
02-CTVG |
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™
grade glass. Uses the SV-S1 support sleeve. |
| |
01-CVG |
100µL,
clear glass, crimp top, round bottom vial, with built in needle
guide, made from inert CHROMACOL GOLD™
grade glass. Uses the SV-S1 support sleeve. |
| |
RECOMMENDED
8mm CRIMP (Silver) CAPS |
| |
8-AC(B)-ST144 |
Aluminium
crimp cap, blue, fitted with a blue silicone/red PTFE seal. |
|
| Table
5 |
SHELL
VIALS |
| |
2.5-NVG |
2.5mL,
clear glass, shell tube. Uses the 12-NPEP4 polyethylene plug. |
| |
1-NWV |
1mL,
clear glass, shell vial. Uses 8-NPWP polyethylene plug closure. |
|
| Table
6 |
HS
500/850
HEADSPACE
SAMPLERS |
| 7 |
10-CV
|
10mL,
clear glass, crimp top vial. For the HS 500. |
| |
20-CV
|
20mL,
clear glass, crimp top vial. For the HS 850. |
| |
RECOMMENDED
20mm CRIMP (Silver) CAPS AND SEALS |
| |
20-MCB |
Tin
plate, blue crimp cap, magnetic. |
| |
20-AC-CBT3 |
Aluminium
crimp cap fitted with a chlorobutyl/PTFE seal. Shore hardness
value 52. |
| |
20-AC-ST3 |
Aluminium
crimp cap fitted with a blue silicone/PTFE seal. Shore hardness
value 45. |
| |
20-AS3
|
Silicone/aluminium
seal. Suitable for temperatures <170šC. |
| |
20-ASH3 |
Silicone/aluminium
seal. Suitable for temperatures >170šC. |
| |
20-B3P |
Butyl
rubber plug. |
| |
20-CB |
Chlorobutyl
seal. Shore hardness value 52. |
| |
20-CBT3
|
Chlorobutyl/PTFE
seal. Shore hardness value 52. |
| |
20-CBT3B |
Chlorobutyl/PTFE
seal, bellows type. Shore hardness value 52. |
| |
20-ST3
|
Blue
silicone/PTFE seal. Shore hardness value 45. |
| |
20-ST101 |
Blue silicone/PTFE seal. Shore hardness value 30. |
|
|
|
|