TSP/SPECTRA-PHYSICS AUTOSAMPLERS
|
|
|
Autosamplers from this group accept many of the Chromacol
12 x 32mm vials. Both crimp and screw top versions are compatible.
We have a special PTFE sleeve, SV-TSP, designed to allow these
units to operate with our 100, 200 and 300無 micro vials.
These sleeves however must not be used with the vial heating
unit.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP AND SCREW CAPS |
| |
2-CV |
2mL, clear
glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL, clear
glass, wide neck, crimp top, flat bottom vial, made from inert
CHROMACOL GOLD™
grade glass. |
| |
2-CV(A)
|
2mL, amber
glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
1.1-CTVG |
1.1mL,
clear glass, crimp top, tapered vial. Made from inert CHROMACOL
GOLD™
grade glass. Needs TTS-313 PTFE support. |
| |
06-PECV |
600無,
polyethylene vial with an internal tapered profile. |
| |
03-FIV |
300無,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| |
03-FIV(A) |
300無,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
2-DV |
2mL, clear
glass, flat bottom, wide neck vial, which may be used with crimp
or screw caps.
DOUBLE TOP™
vial. |
| |
2-DV(A) |
2mL, amber
glass, flat bottom, wide neck vial, which may be used with crimp
or screw caps. DOUBLE TOP™
vial. The 2-DV and 2-DV(A) DOUBLE TOP™
vials are not suitable for use in early model Spectra-Physics
instruments when used with the 11-DSC(R). |
| |
RECOMMENDED
11mm CRIMP (Silver) AND SCREW CAPS |
| |
11-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. |
| |
11-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. Other colours available. |
| |
11-AC-ST101 |
Aluminium
crimp cap fitted with a plain PTFE disc seal. Does not re-seal. |
| |
11-DSC(R) |
Screw
cap, red, multistart, for use with DOUBLE TOPtm vials,
2-DV and 2-DV(A). Needs an 11mm seal: 11-ST15 |
|
| Table
2 |
VIALS
USING 8mm SCREW CAPS |
| 1 |
2-SV
|
2mL, clear
glass, flat bottom, screw top vial. With 'write-on' patch. |
| 2 |
2-SV(A) |
2mL, amber
glass, flat bottom, screw top vial. With 'write-on' patch. |
| |
2-SVG
|
2mL, clear
glass, flat bottom, screw top vial. Made from inert CHROMACOL
GOLD™
grade glass. |
|
1.1-STVG
|
1.1mL,
clear glass, screw top, tapered vial made from inert CHROMACOL
GOLD™
grade glass. Needs a TTS-312 support. Not suitable for older
model Spectra-Physics autosamplers. |
| 4 |
06-PESV |
600無,
polyethylene, screw top vial with an internal tapered profile.
These vials accept 8-SC black caps, other colours available. |
| |
RECOMMENDED
CAPS |
| |
8-SC-8RT1 |
Screw
cap, black, pre-fitted with a 1mm thick, type 8, rubber/PTFE
seal. |
| |
8-SC-ST15 |
Screw
cap, black, pre-fitted with a 1.5mm thick, white silicone/red
PTFE seal. Shore hardness value 57. |
|
| Table
3 |
MICRO-VIALS
USING 8mm CRIMP TOPS |
| 5 |
03-CVG |
300無,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™
grade glass. |
| |
02-CTVG |
200無,
clear glass, crimp top, tapered vial made from inert CHROMACOL
GOLD™
grade glass. |
| |
01-CVG
|
100無,
clear glass, crimp top, round bottom vial made from inert CHROMACOL
GOLD™
grade glass. The above 3 vials use the SV-TSP PTFE sleeve. |
| |
08-CRV(A) |
800無,
amber glass, crimp top, round bottom vial. Needs WS-5 PTFE support
sleeve. |
| |
06-CTV(A) |
600無,
amber glass, crimp top, tapered vial. Needs WS-5 PTFE support
sleeve. |
| |
RECOMMENDED
8mm CRIMP (Silver) CAPS |
| |
8-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. |
| |
8-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
8-ACT |
Aluminium
crimp cap fitted with a plain PTFE disc seal. Does not re-seal. |
| |
8-PEC1 |
SNAP CAP™,
polyethylene. |
|
| Table
4 |
LOW-VOLUME
INSERTS FOR USE
WITH 2-SV. 2-SV(A), 2-SVG |
| |
02-MTV
|
200無,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV
|
200無,
clear glass, low volume, flat bottom insert. No support needed. |
| |
LOW
VOLUME INSERTS FOR USE WITH2-CV, 2-CVG, 2-CV(A), 2-DV, 2-DV(A)
|
|
02-MTVWG |
200無,
clear glass, tapered low volume insert for use with 2mL flat
bottom, wide neck vials. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support.
|
| |
03-NV
|
300無,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck vials. |
| |
03-NV
|
300無,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck vials. |
|
| Note
3 |
03-FISV |
Available
July 1998. |
|
|
|
|