VARIAN LC AUTOSAMPLERS 9090/9095
|
|
|
A number of our vials, caps and seals are compatible with
these autosamplers. Our ST-15 and ST-14 seals have the required
hardness for these instruments. There are many 12 x 32mm vials
which will operate with the Varian autosamplers. The most
popular are our 2-SV and 2-CV vials. Our MICRO+™ range are
also suitable when small samples have to be used.
|
|
|
| Table
1 |
VIALS
USING 11mm CRIMP CAPS |
| |
2-CV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-CVG
|
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™
grade glass. |
| 3 |
2-CV(A)
|
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
1.1-CTVG |
1.1mL,
clear glass, crimp top, tapered vial made from inert CHROMACOL
GOLD™
grade glass. Needs a TTS-314 PTFE support sleeve, |
| |
06-PECV |
600µL
polyethylene,
crimp top vial with an internal tapered profile. |
| |
06-PPCV |
600µL,
polypropylene crimp top vial with an internal tapered profile. |
| |
03-FIV |
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| |
03-FIV(A) |
300µL,
one piece, glass insert and amber vial combination. With 'write-on'
patch. Micro+™. |
| |
RECOMMENDED
11mm CRIMP (Silver) AND SCREW CAPS |
| |
11-AC7
|
Aluminium
crimp cap fitted with a type 7 rubber/PTFE seal. Shore hardness
value 60. Available in other colours. |
| |
11-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57.
|
| |
11-AC-TST1 |
Aluminium
crimp cap fitted with a sandwich type seal, red PTFE/white silicone/red
PTFE seal. Shore hardness value 57. |
| |
11-AC-V1
|
Aluminium
crimp cap fitted with a viton disc seal. Shore hardness value
62. |
|
| Table
2 |
VIALS
USING 8mm SCREW CAPS |
| 1 |
2-SV |
2mL,
clear glass, flat bottom, screw top vial. With 'write-on' patch.
|
| |
2-SV(A) |
2mL,
amber glass, flat bottom, screw top vial. With 'write-on' patch.
|
| |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made from inert CHROMACOL
GOLD™
grade glass. |
| |
1.1-STVG
|
1.1mL,
clear glass, screw top, tapered vial made from inert CHROMACOL
GOLD™
grade glass. Needs a TTS-312 support. |
| 2 |
06-PESV |
600µL,
polyethylene, screw top vial with an internal tapered profile.
|
| |
06-PPSV |
600µL,
polypropylene, screw top vial with an internal tapered profile.
These vials accept all 8-SC caps,
other colours available. |
| |
RECOMMENDED
8mm CAPS, SEALS AND PLUGS |
| |
8-SC-8RT1 |
8mm,
black, screw cap pre-fitted with a type 8 rubber/PTFE seal.
|
| |
8-SC-ST15 |
8mm,
black, screw cap pre-fitted with a white silicone/red PTFE seal.
Shore hardness value 57. |
| |
8-ST14
|
Blue,
1.4mm thick, silicone/PTFE. Shore hardness value 50. Low cost. |
| |
11-PEP2(B) |
11mm
black polyethylene plug. |
|
| Table
3 |
MICRO-VIALS
USING 8mm CRIMP CAPS |
| 4 |
03-CVG |
300µL,
clear glass, crimp top, round bottom vial, made from inert CHROMACOL
GOLD™
grade glass. Needs SV-S3A support |
| |
02-CTVG |
200µL,
clear glass, crimp top, tapered vial, made from inert CHROMACOL
GOLD™
grade glass. Needs SV-S3 support |
| |
01-CVG
|
100µL,
clear glass, crimp top, round bottom vial, with built in needle
guide, made from inert CHROMACOL GOLD™
grade glass,
The above
3 vials use the SV-S3 support.
|
| |
RECOMMENDED 8mm CRIMP (Silver) CAPS FOR MICRO-VIALS |
| |
8-AC7 |
Aluminium
crimp cap fitted with a type 7, rubber/PTFE seal. Shore hardness
value 60. |
| |
8-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
8-AC-TST1 |
Aluminium
crimp cap fitted with a sandwich type seal, red PTFE/white silicone/red
PTFE seal. Shore hardness value 57. |
| |
8-AC-V1
|
Aluminium
crimp cap fitted with a viton disc seal. Shore hardness value
62. |
|
| Table
4 |
LOW
VOLUME
INSERTS
FOR USE WITH 2-CV, 2-CVG, 2-CV(A) |
| |
02-MTVWG
|
200µL,
clear glass, tapered low volume insert for use with 12x32mm
flat bottom, wide neck vials. Made from inert CHROMACOL GOLD™
grade glass. Needs MTS-1 support. |
| |
03-NV
|
300µL,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck vials. |
|
| Table
5 |
LOW
VOLUME
INSERTS
FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV |
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support. |
| |
02-NV |
200µL,
clear glass, low volume, flat bottom insert. No support needed. |
|
|
|
|