WATERS 96 and ALLIANCE
|
|
|
Two vials made and developed especially by Chromacol are
available for the 96 position autosampler. These are our 1.2-CWV
and 1-CWV vials. For use with small samples we would recommend
the use of the 1-CWV vial because of its tapered base.
|
|
|
| Table
1 |
VIALS
USING 8mm
CRIMP CAPS |
| 2 |
1.2-CWV
|
1.2mL,
clear glass, crimp top, flat bottom vial. |
| 4 |
1-CWV |
1mL,
clear glass, crimp top, tapered vial. |
| |
RECOMMENDED
8mm CRIMP
(Silver) CAPS |
| |
8-AC5
|
Aluminium
crimp cap fitted with a type 5, rubber/PTFE seal. Shore hardness
value 38. |
| |
8-AC5(B) |
Aluminium
crimp cap, blue, fitted with a type 5, rubber/PTFE seal. Shore
hardness value 38. |
| |
8-AC5(R) |
Aluminium
crimp cap, red, fitted with a type 5, rubber/PTFE seal. Shore
hardness value 38. |
| |
8-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
8-PEP1 |
Low
cost polyethylene plug type closure. |
|
| Table
2 |
SHELL
VIALS |
| 1 |
1-NWV |
1mL,
clear glass shell vial. Uses 8-NPWP polyethylene plug closure. |
|
ALLIANCE
|
| Table
1 |
VIALS
USING 11mm
CRIMP CAPS |
| |
2-CV
|
1.2mL,
clear glass, crimp top, flat bottom vial. |
| |
2-CVG |
2mL,
clear glass, wide neck, crimp top, flat bottom vial, made from
inert CHROMACOL GOLD™
grade glass. |
| |
2-CV(A) |
2mL,
amber glass, wide neck, crimp top, flat bottom vial. With 'write-on'
patch. |
| |
1.1-CTVG
|
1.1mL,
clear glass, crimp top, tapered, wide neck vial. Made from inert
CHROMACOL GOLD™
grade glass. Needs TTS-312 PTFE support. |
| |
06-PECV |
600µL,
polyethylene vial with an internal tapered profile. |
| |
06-PPCV |
600µL,
polypropylene vial with an internal tapered profile. |
| |
03-FIV
|
300µL,
one piece, clear glass insert and vial combination. With 'write-on'
patch. Micro+™. |
| |
03-FIV(A) |
300µL,
one piece, amber glass insert and vial combination. With 'write-on'
patch. Micro+™.
|
| |
RECOMMENDED
11mm CRIMP (Silver) CAPS |
| |
11-AC-ST15 |
Aluminium
crimp cap fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
|
| Table
2 |
VIALS
USING
8mm SCREW CAPS |
| 3 |
2-SV |
2mL,
clear glass, crimp top, flat bottom, wide neck vial. With 'write-on'
patch. |
| |
2-SV(A) |
2mL,
amber glass, flat bottom, screw top vial. With 'write-on' patch.
|
| |
2-SVG |
2mL,
clear glass, flat bottom, screw top vial. Made from inert CHROMACOL
GOLD™
grade glass. |
| |
06-PESV
|
600µL,
polyethylene, screw top vial with an internal tapered profile.
|
| 2 |
06-PPSV |
600µL,
polypropylene, screw top vial with an internal tapered profile.
These vials accept all 8-SC
caps,
other colours available. |
| |
RECOMMENDED
CAPS AND
SEALS |
| |
8-SC-8RT1 |
Black
screw cap, no seal. Also available in red, white, yellow, and
blue. |
| |
8-SC-ST15 |
Black
screw cap pre-fitted with a white silicone/red PTFE seal. Shore
hardness value 57. |
| |
8-ST15 |
1.5mm
thick, white silicone/red PTFE seal. Shore hardness value 57.
|
|
| Table
3 |
LOW
VOLUME INSERTS
FOR USE WITH 2-CV, 2-CVG, 2-CV(A) |
| 4 |
02-MTVWG |
200µL,
clear glass, tapered low volume insert for use with 2mL flat
bottom, wide neck vials. |
| |
03-NV |
300µL,
clear glass, low volume, flat bottom insert. No support needed.
For use with wide neck vials. |
|
| Table
4 |
LOW
VOLUME
INSERTS FOR USE WITH 2-SV, 2-SV(A), 2-SVG |
| |
02-MTV
|
200µL,
clear glass, tapered low volume insert. Needs MTS-1 support.
|
| |
03-NV
|
200µL,
clear glass, low volume, flat bottom insert. No support needed. |
|
|
|
|